Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: EDP -- Group Buy II



At 12:15 PM -0700 6/10/99, Steve Han wrote:
>David,
>
>Great idea.  Upon consolidating the orders,
>I propose we discuss improvements to be made
>for the newly produced EDPs.
>My comments are as follows:

Probably they have plenty to do just getting everything moved and set up in
a new division. Making a whole bunch of changes at the same time would just
slow things down! The last thing that needs to happen right now is for them
to spend lots of time and money trying to redesign something that is
popular and works fine just the way it is, then you would surely never see
it again!  (or at least not for a really long time....)

What David K. is proposing right now is exactly the right thing to do. If
you are thinking about getting an Echoplex now or someday in the future, or
if you have one on backorder and are waiting for it, now is a great time to
let Gibson/Opcode/whoever know about it. If they see customers out there
waiting, they will move a lot faster to get echoplexes on the shelf. Money
talks, right? Organizing together in a group like this is a great idea, too
- you'll definitely get attention that way. I'd say, get yourself on
David's list for this group-buy, if you haven't already. I think there's a
pretty good chance that this would secure you a unit much sooner and at a
much better price than otherwise! In the past, Gibson (or their dealers)
have given some priority to people coming through this list, and we can
probably convince them to do the same this time.


But I thought I'd try to comment on some of these ideas to help you out and
clarify some things:

>******
>
>"EDPs Input and Output levels are extremely sensitive
>and difficult to set visually as each individual EDPs
>I/O level settings are at different positions from eachother
>to reach the same level setting."
>
>"This is from reviewing 6 different EDPs consisting
>of my 2 EDPs and 4 others owned by friends."

The Input/Output gain in the echoplex was changed a while back, because it
was originally too sensitive. So this is already done. New units are all
done with the same I/O gain as is described for a mod on the Looper's
website. It's much easier to set now. So if you have a mix of older units
and newer units, the knobs might be in different spots for the same gain.
If you do the mod on the website for the older ones, they should be much
more consistent.



>"BrotherSync is a myth and does not work, showing
>'error' message, even with Master to Slave settings."
>"This maybe in part my fault from not knowing the
>intricacy in manipulating the EDP Sync system but
>I can't figure it out from the manual or on a EDP e-group."

Are you using the proper cable? 95% of the time people have a BrotherSync
problem, it is because they are using a mono cable instead of a stereo
(TRS) cable. There is a whole section in the echoplex FAQ about brother
sync, which has this and lots of other helpful tips:

FAQ main page - http://www.annihilist.com/loop/tools/echoplex/FAQ.html
Brother FAQ page - http://www.annihilist.com/loop/tools/echoplex/FAQ7.html

also, if you have older units, some of the early ones tended to give that
ERR message if you had 4 or more of them connected with BrotherSync. New
ones shouldn't have this problem. Even with the old ones, you can usually
just flip it off and on and its ok.


>
>"Sync-ing with Midi In/Out/Thru works but the sync
>falls out of unison after approximately 8 minutes,
>fully discernable after about 12 to 13 minutes."

Are you using the LoopIIIv5.0 software? All reports I've heard are that
midi sync is rock solid with this release, and that's been my experience.
You are syncing the echoplex to another device, like a sequencer, right? Is
that device's clock drifting a lot? If the other device has it's tempo
drift far enough, the echoplex will quit trying to sync to it. But that
usually takes quite a bit of drift. Also, do you have the sync parameter
set right? Are you seeing the green dot on the display flash when the sync
point comes?


>
>"Foot Controller is very fragile and temperamental."
>
>"The Buttons (red) of the pedal are made of circuitry
>of the cheapest kinds and with the precise timing
>the EDP requires for performance, they are difficult to
>control with these cheap red buttons which behave
>unpredictably at times."

I actually tried about 30 different switches around the time we designed
this, and found I liked these cheap red ones the best as far as accurate
tapping goes. The force required to press them wasn't too much or too
little, and I could tell when it contacted. Also, being red made them easy
to see. The trouble is, if you stomp hard on them a lot, you can break
them. Go easy on it, and it will last a long time. (In fact, you will be
much more accurate in tapping if you use a lighter touch....)  My pedal has
lasted 5 years now, with no trouble. If you do break one of them, they are
available from Mouser Electronics (www.mouser.com) and are very easy to
replace yourself.

With the heavy-duty industrial switches, I found they were often difficult
to tap with accuracy, because most required a fairly large amount of force
to press them. A lot of them also make loud click sounds when they contact,
which I find unnacceptable. And in general, they cost $3-6 each, so if you
think the pedal is expensive now, boy would you cry then! If you really
don't like the switches used in the production model, you can try some
other switches and replace them with ones you like. As I said, it's very
easy to do this modification. Also, it's very easy to make your own pedal,
the instructions are on the LD web site.

Otherwise, the pedal is made with good sheet metal construction and
point-to-point wiring. It should be quite rugged.


>
>"The maximum EDP capability of 198 seconds
>should be Standard for all newly produced units."

Now that the cost difference between a 4MB simm and a 1MB simm is pretty
small, I imagine they would do this. Such a thing already happened
once...the echoplex originally shipped with 12.5 seconds installed, with a
50 sec version for quite a bit more money. (and of course, you could
upgrade it yourself to the full 198.)  When the memory prices dropped, they
just sold it with 50 seconds installed at the price where they had sold the
12.5sec version. It's probably at a good point to make such an adjustment
again, and I would guess that they will do that sooner or later.


>"Most local Music Stores want to charge arm and a leg
>for a unit of EDP and if you want the pedal with it, they'll
>try to milk you for another $100 to $125."

that's called capitalism.... I'm pretty sure Gibson didn't invent that
one...:-)


>
>"Taking minimum 3 months to receive one from Gibson,
>only the true, dedicated loopers will order EDP while
>the EDP's capability can be marketed to the general
>musician and when advertised smartly, it can become
>a must have for every serious musician."

that I think is a true statement! they just need to make them consistently,
and everything will follow, peace will reign, etc....



>"The price of Echoplex Digital Pro are prohibitive."
>"Mid $500.00 to mid $600.00 seems reasonable,
>which should include the pedal as part of the unit."

again, capitalism..... Demand is much higher than supply, so I wouldn't
expect any dramatic price reductions to happen. Although, street price for
the echoplex usually seems to be in that $600 range (not including the
pedal), which I think is a pretty good deal.

Besides, given that low-end samplers and good effects units are around
$1200, the echoplex price doesn't seem high at all given the extensive
capabilities and the unique set of features.



>The more popular the EDP, the more accessible to us
>the price and availability.
>Perhaps we should be promoting the EDP to every musicians,
>magazines, and music stores we know.
>
>I know some of us are already trying to promote EDPs
>but think of it...
>A pair of EDPs in every musician's garage...


Good luck to you guys, keep poking those Gibson folks, and they'll do what
you want!

kim

______________________________________________________________________
Kim Flint                   | Looper's Delight
kflint@annihilist.com       | http://www.annihilist.com/loop/loop.html
http://www.annihilist.com/  | Loopers-Delight-request@annihilist.com