Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: [Fwd: EDP incoming MIDI Clock filtering options?]



well...um....what Matthias said :-)
no sync in OD


the thing about StartPoint being in the wrong place  is more mysterious 
though.

1) when OD ends there's an auto-startpoint as sync is regained.
2) if the StartPoint was "wrong" from the first loop, it wouldn't show up 
until you tried to Restart. That's why I think either hit Rec at exact 
place when making the first loop, or use Quantise( but I'm not sure if you 
can quantise the start or recording to incoming MIDI).

andy

Per Boysen wrote:
> Well, the problem is not his actions and button pressing... Even when
> he is doing nothing but letting the EDP play a loop it suddenly goes
> OUT OF SYNC. What do you get from that, Andy?
> 
> Per
> (+ Samuel)
> 
> 
> 
> On Fri, Mar 7, 2008 at 3:03 PM, andy butler <akbutler@tiscali.co.uk> 
>wrote:
>> Hi Per, I don't think the EdP can do the the filtering,
>>  but I haven't midi-synced since we all played together at Mathon
>>  .... let's ask the experts ;-)
>>
>>
>>  Maybe the problem is that he's pressing Rec in the wrong place.
>>  Or needs to use Quantise (but I'm not sure about that at all)
>>
>>  andy
>>
>>
>>
>>
>>
>>  -------- Original Message --------
>>  Subject: EDP incoming MIDI Clock filtering options?
>>  Date: Fri, 7 Mar 2008 12:26:24 +0100
>>  From: Per Boysen <perboysen@gmail.com>
>>  To: akbutler@tiscali.co.uk
>>
>>  Hi Andy,
>>
>>  A friend is playing with a cirkus and he is starting to get the
>>  shivers these days because more music with this Cirkus tends to rely
>>  on his EDP and it sometimes loses sync with the Akai MPC1000 he uses
>>  as the master.
>>
>>  Another problem, that occur at a different event, is that the EDP
>>  "places the start point at the wrong part of the cycle". In this
>>  project they run the master clock at 120 BPM but for different parts
>>  of the piece the musicians play half that tempo (meaning 60 BPM) and
>>  sometimes they play two thirds tempo (90 BPM).
>>
>>  My advice, based on "that's what I would have done in Bidule", is to
>>  filter out the SongStart command and bar position data from the master
>>  MIDI Clock signal. Now, the question for you: Do the EDP have a way of
>>  filtering out that?
>>
>>  --
>>  Greetings from Sweden
>>
>>  Per Boysen
>>  www.boysen.se (Swedish)
>>  www.looproom.com (international)
>>
>>
> 
> 
>