[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: help assigning RME audio outputs to Mobius ports



don't forget about rme's matrix mode...very cool for quick routing 
solutions.

- jim

On Tuesday, September 28, 2010, Louie Angulo
<louie.angulo@googlemail.com> wrote:
> thanx Jeff and Per,yes im using it as a stand alone,i just got the RME 
>400 used without a manual but im just reading the online one and i think 
>is done by rather assigning channel 1+2 on every channel strip of the RME 
>software mixer,im at work and cant try this right now but so it seems in 
>the manual on pg.66.
>
> Now i have to find out how i can quickly do a "panic mute all output" or 
>access the master level since i dont want to use a mixer
> I see it can also be configured to be controlled by a midi remote control
> In the manual it says:
>
> "TotalMix can be remote controlled via MIDI. It is compatible to the 
>widely spread Mackie Controlprotocol, so TotalMix can be controlled with 
>all hardware controllers supporting this standard.Examples are the Mackie 
>Control, Tascam US-2400 or Behringer BCF 2000.Additionally, the stereo 
>output faders (lowest row) which are set up as
> Monitor Main outputs inthe Monitor panel can also be controlled by the 
>standard Control Change Volume via MIDIchannel 1. With this, the main 
>volume of the Fireface is controlable from nearly any MIDI equipped 
>hardware device"
> so what would be a nice and compact controller to use for this,any 
>recomendations or is anybody using it with something like that? the 
>smallest the better!
>
> cheers
> Luis
> Luis
>
>
>
>
> On Tue, Sep 28, 2010 at 6:48 PM, Per Boysen <perboysen@gmail.com> wrote:
> You do this in Mobius Track Setup. Depending on if you are using
> Mobius as a standalone application or a plug-in inside a host
> application you use either "Audio In/Out Port" or "Plugin In/Out
> port". If running it as a plug-in you may also need to match the
> settings of the host application.
>
> Greetings from Sweden
>
> Per Boysen
> www.boysen.se <http://www.boysen.se/>
> www.perboysen.com <http://www.perboysen.com/>
> www.looproom.com <http://www.looproom.com/> internet music hub
>
>
>
>
>
>
> On Tue, Sep 28, 2010 at 5:23 PM, Louie Angulo
> <louie.angulo@googlemail.com> wrote:
>> Hi folks,
>> I recently bought the RME FW400 and im having problems assigning ports.
>> I have on my RME mics plugged into channels 1,2 and stereo guitar signal
>> into 3,4,
>> i only hear the output of the mics but not the guitars.
>> In mobius i would like to have them all assigned to ports 1,2 to be 
>able to
>> record in any track i want
>> is this possible or how do you guys do this?
>> thanx
>> Luis
>>
>
>
>