Re: advice sought: taking apart the DL4

["Jeff Duke" <jeff_d@embarqmail.com>]

Rainer, the m9 might be a good replacement for you. It has everything that 
the DL 4 has plus all the other modelers and a decent looper. It is what I 
am using now although my DL 4 is still working.

I will state that IMO the M9's delay's are not as "good" as the DL 4's. To 
my worn out ears anyway. I would recommend trying it first if possible. 
Not 
to say that they are bad by any means. Just not as 'real" I guess? You do 
get the great reverbs however :)

my two cents

j
----- Original Message ----- 
From: "Rainer Straschill" <moinsound@googlemail.com>
To: "Looper's Delight Mailing List" <Loopers-Delight@loopers-delight.com>
Sent: Thursday, October 07, 2010 1:51 PM
Subject: advice sought: taking apart the DL4


> On the current minimalist trip, I discovered that my DL4 has obviously 
> ceased to function.
>
> Question:
> can anyone tell me (or point me to a document that explains) how to take 
> apart the DL4 properly (dismounting PCB etc.)?
>
> Yours,
>
>          Rainer
>
> ps: and failing that - is there anything you'd like to recommend as a 
> replacement - thinking ahead a bit here. Requirements: should do cool 
> delays mainly (like the sweeping filter of the DL4). A nice looper would 
> also be fine. Varispeed for delays a plus but not required.
>
> -- 
> http://moinlabs.de
> Follow me on twitter: http://twitter.com/moinlabs
>