Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Fw: EchoLoop in Live -- any lick MIDI mapping with the FCB1010?



hi Kris,
Per's right.
Ableton is a tech support nightmare because people really
want to use midi-learn/midi-map.
They don't help at all, you need to pass the midi straight through
to the plugin.
...and the fcb1010 has to be programmed as if for a Hardware EDP.

If you *have* got midi-learn stuff set-up then it can only interfere
with how it all should work.

Essentially, you just need to plug your virtual midi cable into the plugin.
(except that the UI in Ableton isn't all that user friendly).

I'll send you a copy of my HOWTO off-list (it has screenshots that don't
travel by mailing list).

andy




Per Boysen wrote:
Can't you change in Live how it should interpret the MIDI event,
momentary or not? If clicking down at the bottom of the MIDI learn
screen - I've done that a lot here.

But generally I think you will save a lot of unnecessary if you use
the EchoLoop as Mathias intended it - like a software EDP clone bound
to react with its actions to pre specified MIDI note events.

Greetings from Sweden

Per Boysen
www.perboysen.com
http://www.youtube.com/perboysen


On Fri, May 18, 2012 at 2:26 AM, Boise Creative & Improvised Music
Festival <krispen.hartung@gmail.com> wrote:
I am going to post this here to see if anyone has figured out a solution.
Basically, I am sending notes from the FCB1010 to Live.  The cool thing is
that in the looper's interface, and in Live, I can actually go into the 
MIDI
map mode, click my mouse on the actual Record button in the looper
interface, and Live will map one of my FCB1010 pedals to it. And I can see
it trying to work when I press my FCB1010 food pedal.

The problem is that when I do the mapping, in the parameters section of
Live, for the looper (bottom of screen), it shows the parameter as a scale
between 0 and 1, like a slider. When I press the button, it basically acts
like a button press and hold, rather than a button press and release.   I 
am
thinking there must be something I can do in Live to re-interpret the
FCB1010 notes data as a toggle and not a press and hold.

On Thu, May 17, 2012 at 11:22 PM, Boise Creative & Improvised Music
Festival <krispen.hartung@gmail.com> wrote:

Per, have you used Matthias' EchoLoop in Live yet?
It seems to load up fine, but I am noticing some strange things when MIDI
mapping my FCB pedals to the buttons.  For example, when I map to the
Record
button, and press it, it seems to hold the button down and not release.  I
am assuming there is a toggle parameter in the looper somewhere? I do not
see it.

Kris