] [Thread Prev
Re: Rack-mounted hardware loopers - switch from LP1 to EDP?
David B. Lamkins wrote:
I'm seeking insights regarding rack-mount hardware loopers...
I currently use an LP1 with the latest stable firmware. It's certainly
usable, but there are a couple of issues: the noise floor is pretty high
and dominated by a high-pitched whine, and the loop splice is noticeable
(too long a crossfade time...?)
Would I be silly to consider replacing the LP1 with an EDP? I don't need
stereo, MIDI sync, or the LP1's scramble and Mellotron functions.
1) I have both the LP1, and EDP here. The Lp1 that I have use of
doesn't have noise floor issues. It doesn't have a high pitched whine,
and I would suggest to check for earthing issues in your rig.
If anything, the EDP has a bit more noise (but not enough that
you wouldn't use it on a CD recording).
So, either you have a faulty LP1, or (hopefully) you can get
better results by reconfiguring your equipment.
Latest stable software 1.39
2) Loop splice sound...depends how you use the looper.
On the EDP to create seamless drones you hit Record, start
fading in your note, then go directly to Overdub.
The same moves are possible on the LP1 (end recording with Rec/Dub)
and should work just as good...however it's too early in the morning for
me to double check that.
if you don't need the special features of the EDP then I wouldn't recommend
moving over to it.
Realistically, neither device is supported.
There's always the looper's delight mailing list ;-)