[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: FCB1010 with Hardware Sampler?



I've heard that the software is much better but I haven't tried it.  Besidesthe software the biggest problem for me was the difficulty stepping on the pads accurately.  What I like about the newer 12 Step is that the back row of pads is raised making it less likely you'll step on the front row while aiming for the back row.  I have not used it, but based on the photos it looks like a big improvement.

Jeff


From: Luis Angulo <louie.angulo@yahoo.com>
Sent: Monday, August 12, 2013 3:34 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: FCB1010 with Hardware Sampler?
 
Hey Jeff,has the softstep gotten any better and adressed all past issues?
 
http://www.myspace.com/luisangulocom

From: Jeff Larson <jeff.larson@sailpoint.com>
To: "Loopers-Delight@loopers-delight.com" <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, August 7, 2013 7:11 PM
Subject: Re: FCB1010 with Hardware Sampler?

The FCB1010 can send Note On on press and Note Off on release so you can use it to trigger a sampler.  I don't think it comes out of the box that way but you can program it to send notes.   The pedals can be programmed to send any MIDI continuous controller including volume (7).   If you haven't already bought one you might also consider this:


It's smaller and the layout is more like a keyboard if that matters, but you'll need a standalone pedal.

Jeff



From: Benjamin Whitehouse <bpwhitehouse@gmail.com>
Reply-To: "Loopers-Delight@loopers-delight.com" <Loopers-Delight@loopers-delight.com>
Date: Wednesday, August 7, 2013 11:14 AM
To: "Loopers-Delight@loopers-delight.com" <Loopers-Delight@loopers-delight.com>
Subject: FCB1010 with Hardware Sampler?
Resent-From: "Loopers-Delight@loopers-delight.com" <Loopers-Delight@loopers-delight.com>
Resent-Date: Wednesday, August 7, 2013 11:11 AM

Hi!

I've searched the website and seen many posts for the FCB1010 but cannot find the answer I am looking for.

I have the FCB1010 and I would like to use it to control a sampler eg a Roland SP-303 however I have read posts on other forums suggesting that this will not work due to the FCB not sending note on midi messages.

Is anyone here using the FCB1010 with a hardware sampler to trigger samples?

If not, is anyone using a different pedal/sampler arrangement that they could recommend? I am a keyboard and guitarist and want to be able to trigger samples on and off using the footpedal. If the volume pedal can be used to control volume, that would be great too.

Thanks!