Support
Looper's Delight
|
Support |
|
|
Hi all I'm using my 2 plexes in a stereo pair both slaved to a MMT8 Midi clock MMT>>>Plex 1 in, plex 1 out>>>Plex 2 in exactely the same settings on the 2 plexes plex 1 2 sync in one footswitch to plex 1 boss vol ped as feedback controler plex 1 2 brother synced Here are some problems I have 1- when leaving the brother sync plugged at power on, the plexes refuses to boot 2-when leaving the brother sync plugged at power off, the current state of the settings seems to not being saved properly (looks like Peter harlan's problem "Subject: EDP problem solved?") 3- when you are in sync in (slaved to midi clock) and decide to stop the seq (nomore midi clock). Perform a record (without resetting the loop) : the slave sometimes starts recording something like 0.5 sec later which creates a serious mess. This happens also after a loop reset but lesser also when you stop or loose midi sync the 2 plexes desyncronize very fast specially if you perform footswitch presses Work around: when you stop a synced use of the plex never forget to reprogram the sync parameter to off BTW the normal synced use of plexes works very fine the problem is when you loose or cut the sync 4- when the feedback pedal is plugged in normaly the loop/delay gives you 3 possibilities loop, del, out. In stereo mode the slave doesnt get the 3; only loop and del Wishlist if ever...the plex will get another update assign one midi contr per function with the value beeing the different options, a second set of values could be long presses a reset all edits controler would reset the plex to a known state ( to start clean for the next tune) protect the midi row parameters by some double button presses a function that could cut out a new shorter cycle out of a longer loop or cycle this last one needs more information than I have the time for today so I'll be back.. Bonne journˇe Claude -- Please correct the reply address by deleting this "----" Veuillez corriger mon adresse pour me rˇpondre en effa¨ant ¨a "----"