Support
Looper's Delight
|
Support |
|
|
I settled on the cheapo solution- a Y-adapter from Radio Shack that cost me $3.49. I haven't noticed any serious sound degradation, but I'm not using anything even vaguely professional anyway. I did look at the Morley switcheroo pedal; it looks nice but I can't justify spending $40+ on that right now. Anyhoo, I've just been playing with my new setup, which now features 2 DOD DFX94 sampler pedals, the new one courtesy of Mr Biffle below. Setting 'em up with 2 different delay times and listening to the loops going in and out of phase is as much fun as I thought it would be! Also listening to Orbital's "In Sides" and realizing how much I have to learn about drum programming... Peter ----- Original Message ----- From: Mike Biffle <mbiffle@svg.com> To: <Loopers-Delight@annihilist.com>; <stanitarium@earthlink.net> Sent: Monday, November 29, 1999 11:13 AM Subject: Re: splitting a guitar signal? > I remember the "Flo-Ho" was supposed to be a very invisible box > according to it's many good reviews. Never used one and don't know > where to find them either... Sorry. > > best, > -Miko > > >>> "Stan Card" <stanitarium@earthlink.net> 11/28 7:57 PM >>> > "Your tone will suffer" being the operative phrase in these replys to > your > splitter question! Over here @ "STANITARIUM" we have tried every > splitter on > this planet and if you are talking about a guitar signal,we have > never > found anything that doesn't in some way deterioate that signal.That > said we > remain humble in our search.When the word "cheap" enters into this > CHEAP is > what you get! Let your ears be the judge...always > searching...STANNER > > ---------- > >From: the Reverend Rob <reverendrob@realm-of-shade.com> > >To: Loopers-Delight@annihilist.com > >Subject: Re: splitting a guitar signal? > >Date: Sun, Nov 28, 1999, 5:28 PM > > > > > On or around 07:13 PM 11/28/99 -0500, Peter Shindler said: > > > >>I want to split my guitar signal and run it into two delay pedals > so I can > >>have two independent loops running against each other. What do I > need to > >>get in order to send the signal in two different directions? > > > > I don't know what pedals you're using, or if they have a direct > out. If > > they do, it's extremely simple. Run one direct/dry out into the > next unit. > > > >> If there's more than one way, what's the cheapest solution? > Thanks. > > > > The "cheapest" solution is to get a y-cable splitter and fork the > signal. > > Your tone, however, will likely suffer. Personally, I'd recommend > a cheap > > 4-track mixer or something equivalent to split the signal if your > delay > > units don't have a direct/dry out, or consider one of the a/b/a+b > channel > > switchers on the floor. > > > > Your mileage will vary; I use rack delays with dry outs, so I've > never had > > to contend with this. ;) > > > > == > > the Reverend Rob ICQ: 1280871 Yahoo: theReverendRob > > ============================================================== > > http://www.realm-of-shade.com/music > > > > >