Support
Looper's Delight
|
Support |
|
|
The 01V only has a single slot for one mini YGDAI card, so you have to choose between ADAT, TDIF, AES, or more analog I/O. We have a dozen of them at work for Avid monitor mixers/MIDI faders. They do provide a lot of functionality at a good price, although I find the dynamics processing less-than-subtle and the effects routing just-OK. There are a lot of submenus on a small LCD, but once you get used to it it isn't too hard to jump around. I made the mistake of mixing an elaborate multichannel theater piece live on the 01V's big brother (the 03D) once, and will never do that again, at least not without a complete Max automation front end. One on-topic anecdote: I don't make a distinction between "control room" and "studio" in my work space, so when I was doing loops of flute key clicks for a project, the 03D was in proximity to a high-gain mic. I kept hearing these odd sounding clicks jump out in the loop, and spent way too long bugging the flutist until we realized it was acoustic noise from the motorized faders. When you switch the fader bank from level control to aux send control, the faders all move to represent the current settings, which is nice, but beware that clacking noise when they hit the end of their slots! -Alex S. At 10:20 AM -0800 2/15/01, Clifford@BienAppraisers wrote: >You will need better pre amp- so much of the sound comes from pre and mic- >be sure to see if you will need additional analog i/o cards for it- that >can >get expensive on some systems- don't know about the o1v- > >cliff > >----- Original Message ----- >From: <lindsay@pavestone.com> >To: <LOOPERS-DELIGHT@loopers-delight.com> >Sent: Thursday, February 15, 2001 10:07 AM >Subject: OT: Yamaha 01V > > > > As much as I'd love to ditch my day job, it does treat me well. Well > > enough, in fact, that I'm considdering dropping several thousand on a >small > > home studio. To that end... > > > > Is anyone using an 01V? What is there to like or dislike? > > > > I'm thinking of picking one up as a front end to a DAW-based home >studio. > > The way I see it, the 01V provides me: > > > > Mic pres. > > A/D/A converters to and from SPID/F, ADAT I/O. > > Dynamics and EQ on each channel while tracking. > > An REV500 effects unit. > > A motorized MIDI fader unit ofr DAW mixing and software synths/FX, >etc. > > A 24 x 4 mixer. > > > > For $1500 or whatever, than seems like a steal. I think I'll pick up >the > > ADAT out card and an RME Hammerfall Lite card for my computer. Anyone >have > > comments about this solution? > > > > L > >