Support
Looper's Delight
|
Support |
|
|
Okay, so I'm really embarrassed. No doubt about that. I won't hesitate to ask if there's anyone on the list, or a recommendation of yours, kim, to do the mod for me. Sadly, you don't wanna let me near a doorknob with a screwdriver, let alone a soldering iron... Thanks, todd Okay, now I'm really embarrassed, can we start a looper's delight therapy list? Best, Todd On 8/26/01 4:22 PM, "Kim Flint" <kflint@loopers-delight.com> wrote: > At 09:34 AM 8/26/2001, todd reynolds wrote: >> Remember that old thread about distortion issues with the edp? Well, I'm >> embarrassed to admit I've always had that problem, and have never >addressed >> it. I have what I think is a pretty old one. And ever since I >received >> it, used, I've never been able to play the damn thing without clipping. > No >> amount of adjustment on input gain seems to work, no matter what the >path >> is, (currently I'm sending from a aux send of a mackie and returning to >a >> regular channel). If it's too low, there's not enough output. So I'm >fed >> up, and it's time to change those resistors, or get some mods or >whatever >> I'm missing. > > the mod to fix that has been recommended for about five years now Todd, > that's a lot of procrastinating! :-) It is easy to do if you know how to > solder (or know somebody who knows how). It just requires changing two > resistor values. It's explained in the Echoplex FAQ at Looper's Delight: > > http://www.loopers-delight.com/tools/echoplex/FAQ6.html#Anchor-47383 > > so people aren't not confused, this problem was fixed in production > echoplexes as of late 1997. > > >> I only have >> an old email address from this list for shane radke, so I could use an >> updated contact, or any other advice you all might have. Thanks in >> advance... > > That info is on the Echoplex page of looper's delight, there is a little > section there for phone and email contacts at Gibson. > http://www.loopers-delight.com/tools/echoplex/echoplex.html Shane is > sradtke@gibson.com. > > kim > > > ______________________________________________________________________ > Kim Flint | Looper's Delight > kflint@loopers-delight.com | http://www.loopers-delight.com >