Support
Looper's Delight
|
Support |
|
|
Nope, what I really need is to be able to put my midi controller into different "banks" where one pedal can be set to perform different CC#s. In other words, in "bank 1" my CC pedal controls pitch shift, in bank 2 it controls tempo. I somehow missed the midi loop select up (PC5) and loop down (PC6) which isn't as good as direct loop access, but will do for the moment. Mark whiteoakstudios wrote: > If you plug a footswitch into one of the CV inputs of the midi rolls, >it'll > output 0 for off and 127 for on, (or vice versa) > Is that what you need ? > > Gareth > > > Yeah, I'm having the same problem you are. If only the Midiwizard > > allowed you to associate a CC# and value for a footswitch... I looked > > at the Yamaha, but didn't get it as money was tight. Other than that, > > the Midiwizard is a fine value. Seems to me the Repeater's midi > > implementation could be better. Does anyone really need to be able to > > access over a thousand loops from the floor? With a 128 meg CFC, that > > would give you about .026 seconds per single track loop. I think users > > would be much better served if you could just control 100 or so loops. > > Still seems like plenty of loops to me. > > > > Mark Sottilaro > > > > rich wrote: > > > > > me again, > > > > > > i am currently using a Rolls MidiWizard to control my jamman. and i > > > (finally) got the pedal programmed so the controlling switches are > > > laid out how i want them, rather than dancing all over the place. > > > thanks to luca for pointers on that from a few months ago... > > > > > > now, i'd like to control the mofx from the same pedal board. on the > > > Rolls, i can map program changes to different channels, but the mofx > > > seems to implement a lot of 0-63=off and 64-127=on type commands on > > > specific control numbers. The Rolls doesn't seem to be sophisticated > > > enough to do this (am i correct here?). > > > > > > yep, kim, you're right....i need a better midi pedal....but....this > > > is what i gots for the moment. > > > > > > so, my question is: which currently manufactured midi pedal will > > > allow me to have switches that will turn parameters of the mofx (or > > > other units....like Repeater, perhaps) on and off with these > > > controller commands. > > > > > > I won't be searching for a pmc-10. Will the Yamaha MFC-10 do this? > > > I'm pretty sure the Rocktron All Access will, but that one seems the > > > priciest of the bunch. > > > > > > Anybody have a specific midi pedal hooked up to a MoFx? > > > > > > best, > > > > > > rich > >