Re: Is there such a function as.....

["Pedro Felix" <PedroFelix@worldnet.att.net>]

Cliff -
Insert, normally does just that, an insert which is added to the loop, mid,
beginning or end point of said loop - subject to press of switch. When
having the Insert set to reverse function as I usually employ, hitting
Insert toggles back and forth from playing the loop in forward to reverse. 
A
long press of Insert enables it to work as intended instead of going
straight to the reverse mode of operation. Thus, enabling another Insert
(additional stuff) into the loop. This way you don't have to do a parameter
change. Yeah, it's cool! Thanks Matthias, Kim, et al!
Not sure if it's in the manual, I can only attest from first foot usage. If
it's not in the manual it's a tip and you should use it well.
best regards, Pedro Felix - NYC 2002

-----Original Message-----
From: Clifford@BienAppraisers <res0koq3@verizon.net>
To: Loopers-Delight@loopers-delight.com
<Loopers-Delight@loopers-delight.com>
Date: Monday, January 14, 2002 3:23 PM
Subject: Re: Is there such a function as.....


>What does long press of Insert do? How do you employ it? I'll check the
>manual later- Thanks.
>
>Cliff
>
>----- Original Message -----
>From: "Pedro Felix" <PedroFelix@worldnet.att.net>
>To: <Loopers-Delight@loopers-delight.com>
>Sent: Monday, January 14, 2002 7:45 AM
>Subject: Re: Is there such a function as.....
>
>
>> -----Original Message-----
>> From: Hedewa7@aol.com <Hedewa7@aol.com>
>> To: Loopers-Delight@loopers-delight.com
>> <Loopers-Delight@loopers-delight.com>
>> Date: Sunday, January 13, 2002 1:39 PM
>> Subject: Re: Is there such a function as.....
>> >DialaThos@aol.com writes:
>> >
>>
>> snipples -
>> >>have 2 seconds of silence after it.  Sort of an "extend loop" 
>function.
>> >the kludgey workaround in repeater would be to 'multiply' by an 
>integer,
>> then
>> >erase just the section(s) of audio what ya don't want..... sorta
>p.i.t.a.,
>> >really, and a bit touchy.
>> >very easy to do on edp, though..... just end a 'multiply' w/the
>> >'record'-function, where ya want the new loop-end to be, i think --- 
>w/o
>> >playing anything into the unit.
>> >best,
>> >dt / splattercell
>> >
>> or if in reverse mode while overdubbing you can do a long press of the
>> insert button and slur it in.
>> best regards, Pedro Felix - NYC 2002
>>
>