Support |
I hate wall warts, but one reason why designers use them, especially in Europe, is that if you can keep all voltages in the unit below 48V, you can save a wealth of time in artwork, documentation and test-houses. To cover most of the approvals, you only have to have the wart itself certified, (and use it across a product range) :) -----Original Message----- From: Kim Flint [mailto:kflint@loopers-delight.com] Sent: 25 January 2002 18:40 To: Loopers-Delight@loopers-delight.com Subject: Re: Cables At 05:53 PM 1/24/2002, Travis Hartnett wrote: > >Another question; > >When wiring your rack, do you try to keep all the power > >cables from the rack units all on one side of the rack? > >Any other wiring bug-a-boos to watch out for? > >That'd be a lot easier if manufacturers would all standardize where they put >the audio and power connectors... another thing to be careful of are devices using wall warts or line-lumps instead of internal power supplies. Of course you need to be sure to secure them well somewhere in the rack so that they don't go flopping all over the place when you move it, because they break easily. But also realize that wall warts are typically cheaply made and not shielded well, and certainly not designed with a professional audio environment in mind. They radiate a lot of power supply hum into the area around them, so you should be careful to keep them as far away from audio cables as possible. It continues to baffle me why some manufacturers use these things in fairly pricey gear. there's just no excuse for that, imo. kim ______________________________________________________________________ Kim Flint | Looper's Delight kflint@loopers-delight.com | http://www.loopers-delight.com