Support
Looper's Delight
|
Support |
|
|
Thanks Kim- I see that you already gave detailed and thoughtful comments before- well... thanks again! Of course you caught me not searching the archives which I generally advise others to do- :) Cliff -----Original Message----- From: Kim Flint [mailto:kflint@loopers-delight.com] Sent: Monday, March 18, 2002 1:30 AM To: Loopers-Delight@loopers-delight.com Subject: Re: EDP loop copy question At 11:34 PM 3/17/2002, Cliff wrote: >I've got the EDP set to copy loop time- but when I advance to the blank >loop it keeps recording past the length of the original loop. Is this >correct or am I missing something? I am looking to have it just copy the >exact same length of the first loop- Thanks- Hi Cliff- I've answered that one before, check the EDP FAQ for some more details: http://www.loopers-delight.com/tools/echoplex/FAQ2.html#loopcopy also some posts in the archive, a couple of which are answering you the last times you asked about loopcopies :-) http://www.loopers-delight.com/LDarchive/200109/msg00988.html http://www.loopers-delight.com/LDarchive/200101/msg00798.html http://www.loopers-delight.com/LDarchive/200009/msg00083.html the short answer is that when you just want to copy the loop time, it is just like doing an Insert into a new loop. (just like copying sound is like multiplying into a new loop.) The cycle time base of your original loop is used. when you copy this time base into the new loop it continues adding multiples. that gives you the flexibility to have a new loop that is either the exact same length as the original or some multiple of that length. When you want to end it, you press Insert, since that really is the function you are doing. kim ______________________________________________________________________ Kim Flint | Looper's Delight kflint@loopers-delight.com | http://www.loopers-delight.com