Support
Looper's Delight
|
Support |
|
|
Kim,
Thanks for the info. I was hesitant about contacting Aurisis directly
because the website says that there is no tech support department and to
contact Gibson instead. Anyway, I thought I was very careful to install it
properly and nothing appears damaged. If I don't hear from Shane I'll
contact you again. Thanks.
Gary
> [Original Message]
> From: Kim Flint <kflint@loopers-delight.com>
> To: <Loopers-Delight@loopers-delight.com>
> Date: 6/23/02 3:53:24 PM
> Subject: Re: Loop 4 Problem
>
> At 04:30 PM 6/22/2002, Gary Rouzer wrote:
> >Hi,
> >
> >I installed my new Loop4 software two days ago but I've got a problem.
> >When I powered the EDP up, while holding the parameters button, the
"Loop
> >4" never scrolled across. I waited for about 2 minutes. I emailed Shane
at
> >Gibson but have not received a response yet. I reinstalled the Loop3
but
> >now it doesn't work either. Any suggestions?
> >
> > Gary
>
>
> Since you bought the LoopIV software directly from Aurisis Research, it
> make a bit more sense to contact us directly when you had a problem
> installing it...
>
> But anyway, if Bret's suggestions don't work it is possible that you
> somehow damaged something while installing the roms or opening up your
> Echoplex. To answer your other question, the "Loop4" begins scrolling
> immediately when you turn on the power. There is no delay. The fact that
> yours is now doing nothing on power up with both Loop4 and Loop3 roms
> indicates a hardware problem of some sort. Hopefully not serious, but
>you
> may want to carefully inspect things to see if anything obviously got
> damaged in the process. Send me a mail if you need more help with it or
> with getting in touch with Shane.
>
> kim
>
>
>
> ______________________________________________________________________
> Kim Flint | Looper's Delight
> kflint@loopers-delight.com | http://www.loopers-delight.com
--- Gary Rouzer
--- gz3739@earthlink.net
--- EarthLink: The #1 provider of the Real Internet.