Support
Looper's Delight
|
Support |
|
|
Hi Andy,
Thanks, I saw a some of that information in some other posts and went
home yesterday and tried programming the 1010 for notes instead of CC's
and
it worked great with the EDP. I even tried some of the new SUS commands
and
they worked great on the 1010! I was using the 1010 for the Repeater only
for a long time and when I decided to try and eliminate the EDP pedal I
programmed some CC's for the Edp. I didn't realize that the pedal source
numbers were assignable seperately which is great too! I love using the
EDP
and the Repeater together. I am feeding them a signal from the new GNX3
and
using the almost Jamman functions of that unit. It is a shame that the
GNX3
will not sync via midi....:{ Thanks for the tips! I know I need to study
the EDP manual more but I purchased too much gear last year and I am still
studying manuals and documenting various approaches to sound
creation....This list is a great source of inspiration using these tools!
Thanks Everyone! I hope it never ends....;}
Say Peace Y'all,
Weg
From: SoundFNR@aol.com
Reply-To: Loopers-Delight@loopers-delight.com
To: Loopers-Delight@loopers-delight.com
Subject: Re: FCB1010
Date: Tue, 23 Jul 2002 05:54:41 EDT
MIME-Version: 1.0
Received: from [207.228.238.9] by hotmail.com (3.2) with ESMTP id
MHotMailBF0672F9001040043254CFE4EE0906FF0; Tue, 23 Jul 2002 02:55:26 -0700
Received: (from looper@localhost)by hemlock.violacea.com (8.9.3/8.9.3) id
FAA17674;Tue, 23 Jul 2002 05:54:55 -0400
>From Loopers-Delight-request@loopers-delight.com Tue, 23 Jul 2002
>02:56:02
-0700
Resent-Date: Tue, 23 Jul 2002 05:54:55 -0400
Old-Return-Path: <SoundFNR@aol.com>
Message-ID: <1a6.5870a46.2a6e81e1@aol.com>
X-Mailer: AOL 5.0 for Windows sub 107
Resent-Message-ID: <xDaX7D.A.FUE.vfSP9@hemlock.violacea.com>
Resent-From: Loopers-Delight@loopers-delight.com
X-Mailing-List: <Loopers-Delight@loopers-delight.com> archive/latest/22266
X-Loop: Loopers-Delight@loopers-delight.com
Precedence: list
Resent-Sender: Loopers-Delight-request@loopers-delight.com
> I had trou=
> ble=20
> programming the pedals for volume and feedback. I didn't find the CC #
i=
> n=20
> the book but I am sure I overlooked it somewhere as I haven't read
the=20
> manual cover to cover sequentially. Can you steer me in the right
directi=
> on.=20
The expression pedals are programmable from the footswitches.
So basically you have to program every switch that you are going
to use if you want the pedals active all the time.
MIDI channel for the pedals is set globally, as for
the other FCB1010 "functions".
So in the Beringer manual, setting the MIDI channel
is on page 10.
Programming the CC for the pedals is on page 13.
The CC Numbers that the EDP expects are given
in the VolumeCont and FeedBkCont parameters.
andy butler
Weg
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com