Support
Looper's Delight
|
Support |
|
|
this aspect of the fcb1010 also drives me crazy, louie, but I just am very, very careful and at the start of any gig (if I am using the footpedals) I run a loop in all four channels to test it out. Now another work around that I thought up just this instant but haven't even tried is to just create a boot patch in your CFC card that has all tracks unmuted with no information in them..........is that possible. no time to check it out, the last gig of the LOOP TRIO TOUR is tonight with Michael Manring and my brother Bill Walker sitting in........I"m really excited about it. When the tour is over I go into serious program the fcb1010 to control the EDP mode...........whew!!!!! here I come................LOL yours, Rick Walker ----- Original Message ----- From: "Louie Angulo" <laab2000us@yahoo.com> To: <Loopers-Delight@loopers-delight.com> Sent: Wednesday, January 29, 2003 3:42 AM Subject: Muting tracks with Repeater via fcb 1010 > The one problem i still have with the repeater is > muting tracks.With my FCB 1010 i have no way of > knowing the state of the tracks since the fcb 1010 > doesnīt have a momentary mode.So sometimes i record > something and i donīt hear the output until i start > tapping the buttons to see which one is muted or not. > This is of course live murder! > Any of you guys doing track muting via the fcb 1010 > live? Can this be done manually? > Any tips? > L.a > > > > > > Hello loopaz... > > > > Few quick questions about the repeater... > > > > - Is there any way to have the inputs on the > > repeater > > have unique track ownership? I ask because I want > > to > > be able to have multiple musicians going through the > > repeater all playing simultaneously...but only > > record > > certain instruments while allowing the others to > > just > > pass through (is there a buypass for tracks on the > > repeater?). Basically, I'm working with bass and > > turntables and I want to be able to record certain > > drum hits and samples from the tables while grooving > > on the bass but when I record, I only want to record > > the tables and not the bass, but also have the > > ability > > to record the bass without the tables. I've tried > > playing with panning the tracks and using stereo > > outs, > > but haven't been able to accomplish this yet. I > > know > > I can do it if I send everything through a mixer, > > but > > unfortunately, I am missing the crucial piece...the > > mixing board! > > > > - Has anyone had problems with the dry mute feature? > > > > I can't seem to dry mute my signal so that only my > > effected signal is audible. Is it because I am > > passing my original signal back into the rptr? I > > have > > the wet/dry ratio set for 100% wet...but I can > > always > > still hear my original signal for certain tones. > > > > - General gear question - I have my repeater and a > > filter factory in an skb case. To save time on > > packup and setup, i tend to keep both units plugged > > into a power strip/surge protector and carefully > > wrap > > the wires neatly and rest them in the case for > > travel. With the near impossibility of getting > > either > > of these units fixed or parts replaced if something > > goes wrong...i'm beginning to think that it may be a > > better idea to take the additional few minutes to > > unplug everything. I am careful to not bend the > > ends > > of the power adapters and do not put any tension on > > them when i wrap them, but does anyone know for sure > > if doing something like this will really hurt my > > power > > adapters over time? > > > > keep on looping... > > > > peace and bass...~e > > evanmeyers@yahoo.com > > > > > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Mail Plus - Powerful. Affordable. Sign up > > now. > > http://mailplus.yahoo.com > > > > > ===== > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com >