Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: more EDP woes



As two people have suggested already, there is a hardware problem with 
your 
unit. You need to have Shane Radtke at Gibson fix it. Information for 
contacting him is on the Looper's Delight echoplex page, near the bottom:
http://www.loopers-delight.com/tools/echoplex/echoplex.html

At 03:56 PM 2/9/2003, DialaThos@aol.com wrote:
>I tried removing and reseating the RAM (in fact swapping slots).  With 
>just
>two chips in the "0" slots it reads 50 seconds (still half what it should 
>be
>with 2 4MB chips, right?).

I don't know which slots you mean by '0' slots, but you may have put the 
memory in the wrong ones. Or you have MoreLoops set to 2 without realizing 
it.

>This is sounding more like a software problem
>than a hardware problem to me right now.

Everybody else's unit is working fine and not having this problem. That 
would tend to indicate it is a hardware problem with your unit. If it were 
a software problem everybody would experience this, and they don't.

>Is Gibson really the best (only?) place to send this.  When I've tried 
>asking
>them about EDPs before they were pretty clueless (best info I got was
>somebody reading the product info to me off their website).

sounds like they need to communicate between divisions better, and you 
were 
unfortunately calling the wrong one. Follow the numbers on the LD site for 
reaching Shane, and you will be in much better hands.

kim


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com