Support
Looper's Delight
|
Support |
|
|
> How do you have the midi parameters set on the Echoplex? *** It is set to receive controllers, not notes, and so is the MFC 10. It does not have any influence what number for CC I use. Othewise, the EDP communicates with MFC 10 on channel 2, and if if I switch it to another channel it does not change anything either. I found that if I change the midi routing it fixes the problem. When it goes MFC 10 ---> Digitech Quad (midi channel 1) ---> EDP it makes the mess I described. When I go to EDP first and then to Digitech Quad it is okay. At this point it is fine to use the second routing, but it would be very helpful for me to understand what's the root of the problem. I assume it's the Digitech, but why? There is the "sysex merge" function in it and I have to have it on in order to get the midi signal go through. Is this the reason? > At 09:47 AM 2/15/2003, Petr Samojsky wrote: > >After I installed Loop IV I have this strange problem happening. When I > >move (or keep moving) the volume pedal (functioning as a MIDI CC sender for > >volume control in EDP out of my Yamaha MFC 10) it sometimes trigers >other > >functions, such as overdub, multiply, mute, etc. And sometimes the loop > >gets erased alltogether. This does not happen always, it is unpredictable. > >But often I hear the volume "jumping/clicking" louder and I notice a third > >digit 2 quickly appear and disappear on the display (as if 217), as the > >volume changes between 0 and 127. > > > >It does not have any influence when I change the MIDI channel for volume > >control, and this has never happened in Loop III. Any suggestions? > > > >Thanks, > > > >petr > > ______________________________________________________________________ > Kim Flint | Looper's Delight > kflint@loopers-delight.com | http://www.loopers-delight.com >