Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: repeater noise problems



Right.  All units generate some noise (noise floor) that's just the nature 
of
reality...right now.  If the unit's functioning correctly, that noise floor
should be low enough compared to the signal on it so that you don't notice 
it.
(I don't on mine)  However, if you are pluging it into a guitar amp, it's 
going
to expect a tiny signal and hope to boost it a lot. (instrument level to 
line
level)  If it's already at line level, it's still going to boost the whole
thing, noise and all.  You'll have to turn down your signal or you may 
distort
the input.  Now the noise is a LOT closer to the signal level.  Not good.
Running distortion effectivly ads compression which is even worse.  I did 
an
experiment with my guitar amp.  First, I plugged the guitar right into the 
main
in.  Not much noise.  Then I put the repeater before the amp.  A lot of 
noise.
Then I put the repeater in the amps stereo line level effect loop.  Noise
gone.  That's why I bought this amp, because it was one of the only guitar 
amps
out there that had a stereo line level effect loop.  (a Johnson JT50) and 
it
was being blown out by Musician's Friend for $250.  I think it's a hell of 
an
amp for it's price.  But I digress...

Mark

Paul Weissman wrote:

> how about noise with nothing playing back and nothing plugged in?  
>turning
> the volume up on this unit ends up with a really electrical sounding 
>zippery
> type noise.  strange.  i'll have to go get my other one and do a 
>comparison.
>
> > -----Original Message-----
> > From: sine@zerocrossing.net [mailto:sine@zerocrossing.net]
> > Sent: Tuesday, March 04, 2003 12:31 PM
> > To: Loopers-Delight@loopers-delight.com
> > Subject: Re: repeater noise problems
> >
> >
> > I think there were some units with defects, but I think a lot of
> > peoples issues
> > with the Repeater stem from the fact that it's strictly a line
> > level device and
> > doesn't do well with guitar/instrument level stuff.  Tricky to
> > set up your gain
> > stages if you're going into a guitar amp.
> >
> > Mark
> >
> > Paul Weissman wrote:
> >
> > > does anyone know of any common problems with repeater noise?  i 
>vaguely
> > > recall a thread about this, but i could be imagining things.  i have 
>a
> > > repeater here that has a very high noise output on both main
> > and headphones.
> > > any ideas?
> > >
> > > thanks,
> > > paul
> >
> >