Re: Lexicon MPX G2 Jamman synch issue resolved

[Matthias Grob <matthias@grob.org>]

Mark,

If you are sure about the splitter, thats fine.

to make the G2 master would still be an interesting test.

And I remembered of another possible problem:
If we have the EDP inserted to the G2 or a loop running on the 
internal Jamman, we want it to be reverbed constantely, even when 
changing preset to get a different effect before the loop or a 
different sequence of effects. As I understand from the manual, they 
thought of that and kept the Reverb program separate. Still, if you 
could confirm that there is no interruption, or better: in which case 
there is an interruption at preset change.
{ I remember that in the Roland SRV2000 reverb, there is no 
interruption when some parameters like room size are the same in the 
previous and the new preset, while other parameters like reverb time 
could change without causeing interruption }

thank you
Matthias

>I did not try it the other way, nor did I put the plugged in 
>splitter back, because I've had this issue many times in the past 
>with other MIDI syncable devices.  I've been working a lot (March 
>has been crazy!  Is the economy coming back?) so I ran out of time. 
>I'll try again sometimes this weekend and report back.
>
>Mark
>
>On Friday, March 7, 2003, at 04:43 AM, Matthias Grob wrote:
>>also: did you verify that you get the drift when you put that 
>>spitter back (with or without power). It does not make much sense 
>>to me, and maybe the drift happens sometimes and sometimes not...
>>
>>thank you
>>Matthias

-- 


          ---> http://Matthias.Grob.org