Support |
Hi all, At my past two gigs this week I tried to run some effects and loop my voice. I was having a severe problem with feedback. Let me explain my set up; Behringer MX802A mixer, vocal in channel 1, acoustic guitar channel 2, lap steel in channel 3, DL-4 in the aux send 1(pre-fader) being returned to channels 7 and 8. Boss HR-2 harmonist and Boss DD-5 in aux send 2 (post-fader) being returned to channel 5. When I applied the DD-5 to my voice I didn't have much of a problem with feedback, However, when I ran my voice through the DD-5 and then ran that into the DL-4, after a few overdubs I would experience some pretty wicked feedback. Now, If I ran my voice straight into the DL-4, sans DD-5, I had absolutely no problem with feedback. I wasn't using any monitors, and the speakers were up on stands considerably in front of the microphone. I have some idea of what the problem might have been. But if someone can explain what is happening and what are some possible solutions to the problem I would greatly appreciate it. Thanks, John www.johnmazzarella.com