RE: Stereo EDP issue

[Jim Palmer <jimp@pobox.com>]

yeah, this is a little unclear.
the stereo section of the manual says nothing 
about sync settings, other than mentioning a 
brothersync connection.   the sync section says:
"All Echoplexes using BrotherSync should set Sync=Out."

but i have definitely used the brothersync connection
to sync two echoplexes with sync=in on the slave.
in fact the guy i was playing with got quite upset
at me for ignoring the manual.  but ignore it i did
and work it did, and when 800 years you reach look
as good you will not...

like i said, i don't have two edp's at the moment, so
i can't test it myself.  it may be that the threshold 
setting will still screw it up.
try it and see if you get the same problem.

note: the edps are not really in brothersync at this point,
because only the master can set the loop length.
for stereo operation this is not important,
but sample accurate sync is...


>...
> 
> >do you have synch set to in on the slave unit?
> 
> Manual says not to.
> 
>...