Re: EDP BrotherSync

["Doug Cox" <dougcox@pdq.net>]

My first suggestion is to check your sync parameters.  If you want to
BrotherSync (sounds like you do), both EDP's should be set to "Out" for the
Sync parameter.  This on page hmmmmidunno of your EDP manual ;)

Doug
----- Original Message -----
From: "Glenn Poorman" <gpoorman@twmi.rr.com>
To: "Loopers Delight" <Loopers-Delight@loopers-delight.com>
Sent: Thursday, November 20, 2003 6:25 PM
Subject: EDP BrotherSync


> Hello all,
>
> I'm new to the list but have been perusing the archives
> for a while. I am a Chapman Stick player and do quite
> a bit of looping with the EDP. Recently, I picked up a
> second EDP to run in stereo using BrotherSync. I've
> noticed since hooking the unit up, however, that my
> right and left channels slowly go out of sync as the loop
> plays.
>
> My setup is as follows. One white face EDP and one
> EDP Plus both running Loop IV. MIDI cable from the out
> of the master to the in of the slave. A TRS to TRS cable
> connecting the two BrotherSync jacks. All parameters
> are identical on the two machines including the sync
> which is set to "Out".
>
> >From what I've read in the archives, it appears that plenty
> of you have run two EDPs in stereo with great success so
> I can only assume that the blame lies squarely on my shoulders.
>
> Any insight would be most welcome.
>
> Thanks,
> Glenn
>