Support |
>>I recall seeing somewhere some instructions on how to build and wire
up an external footswitch for the DL-4 (or any line 6 stompbox I guess).
The idea was to have the four control switches on the floor for your feet<<
that ought to be easy enough, if you can solder and do a bit of metalwork. I'd guess that the four existing switches are all closures-to-ground, but even if they're not, the worst case is that you'll need an 8-way socket mounting on the dl4 somewhere. a midi-type socket, though perhaps with a different pin orientation, would be ideal. then just wire the remote switches in parallel with the ones inside the dl4, via the socket, a suitable plug and whatever you're putting on the floor by way of a remote.
(incidentally, I am still aiming to introduce midi-clock-derived pulses into my dl4 as a midi version of tap-tempo.)
but why not just use an expression pedal?
d.
***************************************************************************
CONFIDENTIALITY NOTICE
The contents of this e-mail are confidential to the ordinary user
of the e-mail address to which it was addressed, and may also
be privileged. If you are not the addressee of this e-mail you may
not copy, forward, disclose or otherwise use it or any part of it
in any form whatsoever.If you have received this e-mail in error,
please e-mail the sender by replying to this message.
It is your responsibility to carry out appropriate virus and other
checks to ensure that this message and any attachments do not
affect your systems / data. Any views or opinions expressed in this
e-mail are solely those of the author and do not necessarily
represent those of MTV Networks Europe unless specifically stated,
nor does this message form any part of any contract unless so stated.
MTV reserves the right to monitor e-mail communications from
external/internal sources for the purposes of ensuring correct
and appropriate use of MTV communication equipment.
MTV Networks Europe
***************************************************************************