Re: edp midi sync out

["Claude Voit" <c.voit@vtx.ch>]

hey uca
what is the tempo source in the fireworks ?
be sure to set it to midi clock and _not_ to tap tempo as it seems (you say
fw set to edp channel BUT midi clock is NOT channel relevant)
so you probably better set it on another channel...;=)
btw I dont have a fw     but a GForce and I'm guessing

have  a nice day

Claude

I'll be back to you very soon concerning the rivolta gig....



----- Original Message ----- 
From: "Luca Formentini" <luca@unguitar.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Thursday, January 08, 2004 5:17 PM
Subject: edp midi sync out


> Hi everybody,
> I see my post regarding the strange behaviour of a Fireworx slave to
> Edp's midi sync passed with no interest, but I need to make some light
> over the following:
> Edp Sync=Out
> Edp Midi out goes into Fireworx midi in
> Fireworx set to respond midi tempo from Edp's midi channel.
> Everything goes ok.
> Now a loop is going, Fireworx is in sync.
> Whenever I touch any button (multiply, reverse, overdub, mute...) on the
> efc7, I see the Fireworx panel receives each time a new midi tempo order
> (which is still the same originally received at the setting of the
> loop), this thing is a bit annoying as the Fireworx has a sort of "stop
> and go" with the effects which are following its midi sync.
> I also suspect this is the cause of the freezing of the Fireworx, after
> a while.
>
> Any help would be greatly appreciated.
> Luca
>
>