Support
Looper's Delight
|
Support |
|
|
I figured it out! I'll spare you the boring troubleshooting notes. The problem was that the new Loop IV chips needed to be pushed in a little more. I was being to gentle. I have noticed that that front panel lights that are displayed after turning on the units, will differ depending on how the parameters are set. Is there a "decoder ring" somewhere that will allow me to have an idea how the parameters are set just by looking at the front panel lights? On Jul 5, 2004, at 2:50 PM, Kim Flint wrote: > At 05:54 PM 7/3/2004, John Metzler wrote: >> I have 2 EDP's being controlled with MIDI by an MPC 1000. I have 1 >> EDP receiving on Ch.1 sent from track one of a sequence and the other >> EDP on Ch.2 receiving it's messages from track 2 of the sequence. >> Yesterday everything worked fine. I didn't change anything, even >> after tripple checking it all seems to be where it should be. But >> now EDP 2 doesn't see any in coming messages but still syncs to Beat >> Clock. > > when you say "Beat Clock" I assume you mean MIDI clock? > > If it can receive MIDI clock, then it is receiving MIDI fine. The > problem isn't the Echoplex, it must be something else in your setup. > Are all the MIDI parameters in the Echoplex set as you expect? To me > it sounds like the MIDI channel is wrong. Or maybe you changed the > ControlSource or Source# parameters by accident. > >> Does this sound like a broken EDP? > > no, doesn't sound like it. If it were broken no MIDI would be received. > > kim > > > ______________________________________________________________________ > Kim Flint | Looper's Delight > kflint@loopers-delight.com | http://www.loopers-delight.com