Re: Pedalboards anyone?

["Dean Stiglitz" <deknow@netzero.com>]

since i have a number of shows coming up that won't allow for long setup
times (and i also have all the mixing, recording, and pa gear as part of my
setup), i decided i needed to have things presetup...so here is what i did
(it's not permanent, it isn't well protected, but it is movable).

i had a 4 space rack bag...i pulled the cover off, and mounted my rack 
stuff
(repeater, vl70m, maudio mobil pre, proteus world).  on the top, i glued (a
glue gun with slow setting glue) a piece of cardboard, and to the cardboard
i glued the evolver, rv3, and midiman 2x2 midi interface.  after wiring all
the power (to a powerstrip)and permanent audio, i glued all them down ontop
or inside.  for setup, i plug the rack in, analog audio to the evolver and
usb interface, spdif to the repeater (all to the mixer), wind controller to
vl70 (front pannel wx connection), usb to the audio and midi interfaces, 
and
the thunder out to midi interface.  all stray wires are glued well enough 
to
not flop around.  eventually, i'll build something more permanent that can
be closed up, that will tilt the rack stuff up a little.

deknow