----- Original Message -----
Sent: Monday, June 06, 2005 2:59 PM
Subject: ultralink
Hi everybody , I'm new to the list and I want to share a trick from
my" looping station" , and please excuse my english.
I use the berhinger ultralink to plug all my equipment and rout the signal
like I want .maybe some of you have heard about the ultralink , it's a very
interresting product : it's a mixer and a splitter . it has a stereo input and
output , and 6 channels you can set like a mixer or a splitter.
here's my setup: the original signal come from the send (fx loop )of
my preamp and goes to the left input of the stereo input of the ultralink ,
from the 6th channel as a splitter , it goes to a DD20 then return ( only the
delayed signal ) in the right input of the stereo input of the ultralink
, then it goes from the first and 2nd channels as a splitter to two differents
effects who return in channels 3 and 4 as a mixer , so I can send to the
effects the dry or the wet or both signal from the stereo input ( each channel
has a panpot so you can choose what signal you want to split from the stereo
input ) , channels 3 and 4 are mixed and go back to my preamp by the left
output of the ultralink but I send from the right output this signal also to a
second delay who is return in the channel 5 as a mixer ( delayed signal only
).
Like this I can loop a clean signal from my preamp , I can send the wet or
dry signal in any effect ( I can have my inst in effect A and my delayed
signal in effect B )
all is going back to my amp and I can loop a signal from the 2 effects in
my second delay then send it back to my preamp too!
The sound is very good no noise buzz etc at all , the ultralink is
very transparent and noiseless . trust me
so if you have problems to find a good setup ( noise , -10 +4 db conversion
, or other ) try this !
enjoy
Pat
