RE: Changing EDP Parameters via MIDI

["Claude Voit" <c.voit@vtx.ch>]

The excel spreadsheet ( 
http://www.loopers-delight.com/tools/echoplex/echoplex.html )is great for 
all midi commands but wont give you the commands to switch quantize on/off 
on the edp.(it is on the LD site
this is sys ex domain

Quant Cycle
F0 00 01 30 0B 01 01 13 02 01 00 01 F7
Quant 8th
F0 00 01 30 0B 01 01 13 02 01 00 02 F7
Quant loop
F0 00 01 30 0B 01 01 13 02 01 00 03 F7
Quant Off
F0 00 01 30 0B 01 01 13 02 01 00 00 F7

Claude





There's a handy Excel spreadsheet that sets out all the EDP MIDI commands:

PLEX_MIDI_COMMANDS_2.xls

Can't remember where I found it (probably on Loopers-Delight). Can forward
it to you if you like.

Best wishes

Jeremy


http://www.masse.org.uk









> From: <loopdelightml@nosuch.biz>
> Date: Thu, 14 Jul 2005 00:47:50 +0200
> To: <Loopers-Delight@loopers-delight.com>
> Subject: RE: Changing EDP Parameters via MIDI
>
> Hi Kris
> It's not such a big deal to set up presets on the EDP. I have one that I 
> use
> for the Insert=SUB quantized and one non quantized.
> Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to be
> sent on a button down and other arbitrary MIDI-Strings on button up.
> I don't know about the Behringer FCB1010.
> Bernhard
> -----Original Message-----
> From: Hartung, Kris [mailto:kris.hartung@hp.com]
> Sent: Mittwoch, 13. Juli 2005 23:00
> To: Loopers-Delight@loopers-delight.com
> Subject: Changing EDP Parameters via MIDI
>
> Can anyone point me to a primer on if, and how to change parameters on 
>the
> EDP via MIDI? Rick has me experimenting with Insert=SUB with quantize set
> at 8th notes, which generates some cool effects, but normally when I 
>play 
> I
> want quantize set to OFF. Can I send a MIDI signal to the EDP to change
> quantize to 8th notes, perform the Insert magic, and then turn the 
> quantize
> back to OFF? I suppose this will take three button pushes on my FCB and
> consequently take up three more buttons on the unit..
> I suppose I could create a preset on the EDPs with these Quantize 
> settings,
> and select that with a program change, but I was hoping to avoid the 
>work 
> of
> setting that up.
> Kris