Support
Looper's Delight
|
Support |
|
|
Hey Guys, how much? Sounds like a great idea!--instant tremolo! Can this be done with MIDI on the EDP? What happens when you put a sustain type foot controller into a PMC? Gary From: Adrian Bartholomew [mailto:adrian@bartholomusic.com] Sent: Monday, September 19, 2005 10:12 AM To: Loopers-Delight@loopers-delight.com Subject: Re: The Big(ish) Idea nice idea! it would be fun to loop that. i can build it for u. just let me know how big u want the box. how u want the buttons aligned and what type/size of buttons u want to use. i assume u want the standard... in on the right out on the left? <snip> meanwhile, back on the ranch. what do u envision paying for this to be built? the parts wont be that expensive at all and my labor cost would reasonable. we could always figure something out. the most expensive thing would be the box itself. i would do it with active electronics. ie with logic and analog chips that need power. simple 9V adaptor that could chain to ur existing pedals. also ill have true bypass to eliminate any clicking on and off. i already have the schematic in my head and the parts i need. i already have the components i need in my lab too. lucky u! i would just need to order the box and the switches of ur choice. radio shack most likely has the casing u need but i know they dont have any heavy duty foot switches. i need the double pole type to keep it true bypass and momentary for the 2nd switch. it should not click like the 1st on/off switch. just be spring loaded push on/release off. soft feel. Adrian Bartholomew On Sep 19, 2005, at 11:35 AM, phill wilson wrote this original post-- Hi All Ok, so I have been hinting at building a pedal for a while now, for reasons that I won't go into, my Ego kind of wanted to keep the design some sort of secret,however this has led to nowhere for me so it is time to REVEAL ALL!!! Basically I want to make a foot operated device that allows a signal to pass only when the button is pressed. Kind of a Poor-Mans-Morse-Glitch Pedal. I envisaged building it as follows. two buttons button one simply being on / off In off position the signal is bypassed directly to the output jack in the On position it passes to the next momentary button. Button Two is the activation button, it is a push to make type switch so initially the signal is dead, however, when the button is pressed the sound is allowed to pass to the output. I can therefore strum a chord while it is off then tap the button rythmically to let small stabs of sound through. I came up with this when playing through a broken amp that you had to hold the jack in place in the input, i found that tapping the jack let me do dda-da-da type noises. anyways basically I know NOTHING about how to do this, I did what seemed reasonable to me but all I got was nasty hiss and buzzing. I would appreciate ANY help or comments on how I may impliment this pedal. I had once dreamed about making money off this idea, however, it will never be built if I cant get some advice! By the way I intend to LOOP with it so its not totally OT!! Thanks Y'all Phill Wilson (a.k.a. Blackface) Free Downloads at www.download.com/therealblackface