Re: Programming the Behringer FCB1010 for Echoplex use, a quick guide

[Travis Hartnett <travishartnett@gmail.com>]

Nope that didn't work for me.  The Expression Pedal A and B lights
come on when I go to that patch, but the pedal settings themselves
have no effect on the EDP.

TravisH

On 10/30/05, Kris Hartung <khartung@cableone.net> wrote:
> This is what I used...you might want to test my steps. I just programmed
> mine for both Volume and Feedback control.
>
> Kris
>
> Volume
>
>   1.. Press the PRESET button (e.g., whatever you use to trigger Record 
>on
> your EDP)  for which you want to program either expression pedal A or B 
>for
> volume
>   2.. Press and hold down the DOWN switch
>   3.. Press the UP switch
>   4.. Press button 8 or 9 (Expression Pedal A or B), whatever you want to
> use to control volume
>   5.. Press UP to confirm
>   6.. Use Expression Pedal A to set your controller value for that
> expression pedal (use what is set in the EDP control panel in VolumeCont)
>   7.. Press UP to confirm
>   8.. Use Express Pedal A to set the minimum value (e.g. 0)
>   9.. Press UP to confirm
>   10.. Use Expression Pedal A to set the maximum volume value (e.g., 127)
>   11.. Press UP to confirm
>   12.. Press and hold the Down button to Exit
> Repeat steps 1-12 for other PRESET buttons (whatever you use for Overdub,
> Multiply, Reverse, etc.whatever button you want associated with that 
>volume
> change function when that button is lit up
>
>  Feedback
>
> 1.       Press the PRESET button (e.g., whatever button you use to 
>trigger
> Record on your EDP)  for which you want to program either expression 
>pedal A
> or B for feedback
>
> 2.       Press and hold down the DOWN switch
>
> 3.       Press the UP switch
>
> 4.       Press button 8 or 9 (Expression Pedal A or B), whatever you 
>want to
> use to control feedback
>
> 5.       Press UP to confirm
>
> 6.       Use Expression Pedal A to set your controller value (use what is
> set in the EDP control panel in FeedBkCont)
>
> 7.       Press UP to confirm
>
> 8.       Use Express Pedal A to set the minimum value (e.g. I use 106 to 
>set
> a gradual fade-out of my loops when I pull the expression pedal all the 
>way
> back)
>
> 9.       Press UP to confirm
>
> 10.   Use Expression Pedal A to set the maximum volume value (e.g., 127)
>
> 11.   Press UP to confirm
>
> 12.   Press and hold the Down button to Exit
>
> Repeat steps 1-12 for other PRESET buttons (those you use for Overdub,
> Multiply, Reverse, etc.whatever button you want associated with that
> feedback change function when that button is lit up
>
>
>