Re: Controlling 2 EDPs with one Foot Controller??

[bassad <bassad@cfl.rr.com>]

I'm using two EDPs. I ditched the stock footcontoller and use a FCB1010 for
both. I have mine sync'd togther for stereo so each is one the same midi
channel however it would be a simple matter to run them on separate midi
channels.

Craig


on 2/7/06 4:28 PM, Kris Hartung at khartung@cableone.net wrote:

> hi Joe -
> 
> It could have been me. I have a MIDI Thru split box that splits one MIDI
> input into two MIDI THRU outputs. I went from my Behringer into the box, 
>and
> then out with two MIDI cables into each EDP. But I found it easier to 
>just
> go from one EDP MIDI Out to the MIDI in of the other unit. It's called a
> "MIDI Solutions Thru" box.
> 
> http://www.midisolutions.com/products.htm
> 
> 
> Kris
> 
> 
> ----- Original Message -----
> From: "joe rut" <joerut@lycos.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Tuesday, February 07, 2006 2:16 PM
> Subject: Controlling 2 EDPs with one Foot Controller??
> 
> 
> I currently use 2 EDPs, each with dedicated stock foot controller.  I 
>seem
> to recall someone saying they used one controller with 2 EDPs, with an 
>a/b
> box to control which EDP is seeing signal from the foot controller.
> 
> Anyone out there try this?  Any issues with false triggerings, 
>glitches,etc.
> when switching?
> 
> I'd love to pare down my rig to a more reasonable chunk of stage real
> estate, and this would save some floor space if it was reliable.
> 
> Thanks
> 
> Joe Rut
>