Support |
dear Ls, I found a second hand EDP that I bought as second unit and back-up. It's a white Gibson one, even older then the one that I bought from Steve Lawson. These things are really diifficult to find in Italy, as all over Europe. It needs a full-upgrade: memory and software. For the software obviously there's Kim and Aurisis. But the memory search seems painful. At the moment it has 4 1Mb Simm for a total of 50 seconds. Finding the 4m memories seems very hard. On the manual it's written that every 30 pin simm with at last 120ns of speed would be fine. On the FAQ on the LD's site, on the other hand, there's a different info: there its' said that "It can use any type. Parity, non-parity, 2 chips, 3chips, 8 chips, 9 chips, PC, Mac, any speed." Who should I believe to? And since I could probably find only used simms that have no indication of the memory amount, and the only way for me to find out if they're 1, 4, 8 or 16 Mb it's testing them on the EDP, what happens if I mount on it a 8 or 16 Mb Simm? Could it cause a damage to the EDP? Any experience about that? I digged in the archive but couldn't find a proper answer... Tx in advance four your suggestions. all the best from the not-so-much-looping Milano Bruno Klein