Support
Looper's Delight
|
Support |
|
|
>>I have an Ernie Ball volume pedal with a 250k pot, but obviously it is too large a value for the DL-4.....<<
have you tried it? the only thing I had to do to an expression pedal to make it work with a DL4 was reverse the tip & ring connections. I didn't even look at the range of the pot itself.
I'm pretty sure that all the DL4 is looking for is a voltage; the socket will supply (say, for the sake of argument) 5 volts out of this socket, & expect a proportion of this to be returned to it by way of a control signal. the amount of resistance the pot introduces is insignificant; the part of the DL4 that measures the returned voltage probably has a very high input impedance & so very little current will flow.
but I could be wrong..... :-)
in any case, so long as the ernie ball pedal is wired correctly, you won't hurt anything.
d.
***************************************************************************
CONFIDENTIALITY NOTICE
The contents of this e-mail are confidential to the ordinary user
of the e-mail address to which it was addressed, and may also
be privileged. If you are not the addressee of this e-mail you may
not copy, forward, disclose or otherwise use it or any part of it
in any form whatsoever.If you have received this e-mail in error,
please e-mail the sender by replying to this message.
It is your responsibility to carry out appropriate virus and other
checks to ensure that this message and any attachments do not
affect your systems / data. Any views or opinions expressed in this
e-mail are solely those of the author and do not necessarily
represent those of MTV Networks Europe unless specifically stated,
nor does this message form any part of any contract unless so stated.
MTV reserves the right to monitor e-mail communications from
external/internal sources for the purposes of ensuring correct
and appropriate use of MTV communication equipment.
MTV Networks Europe
***************************************************************************