Support
Looper's Delight
|
Support |
|
|
You could split your AUX outs of your board so that you can route them to more than two units. I've done this before successfully...then you just run the output of the LXP1 or LXP5 into a stereo channel of the board, like they do at big concerts (they don't use the AUX return of boards, but actual board channels so that they can EQ it, control it with a fader, etc); I used to use a cheap y-cable to split one of my AUX outs on my Mackie board. That way I could run them to three separate effects processors and then back into the board in stereo. Kris ----- Original Message ----- From: "L.A. Angulo" <labaloops@yahoo.com> To: <Loopers-Delight@loopers-delight.com> Sent: Tuesday, September 19, 2006 5:34 PM Subject: Re: LXP-5/1 (was 1/2 rack stereo effect processor) > Thats a great idea Kris the only problem is that my > auxs are already taken by EDPs;-( > Perhaps routing the treble side of the acoustic pickup > into the mono lexicon(if i get one eventually) and the > bass pickup into my roland effects proccessor could > work well,I was running the pickup system summed in > mono previously which sounded thin compared to going > straight into the mixer with a bit of reverb man what > a difference! > acoustic guitar is new territory for me and i thank u > all for your input! > Luis > > --- Krispen Hartung <khartung@cableone.net> wrote: > >> Well, it's easy to test. Just run a stereo processor >> into the LXP1, which >> has some stereo imaging, and listen if the imaging >> is preserved. It is NOT >> preserved with the LXP5, unfortunately. The LXP5 >> also has stereo inputs, L >> and R, which doesn't necessarily mean true stereo >> separation of the input. A >> damn shame. Thought when I used my LXP1, I ran it >> through the AUX of my >> mixer board....mono Aux send of the mixer into one >> of the LXP1 mono inputs, >> and LXP1 stereo out into a stereo channel of my >> Mackie....worked like a >> charm. I suppose you could do the same with the >> LXP5. >> >> Kris >> >> ----- Original Message ----- >> From: "Kevin Cheli-Colando" <kevin@minds-eye.org> >> To: "Loop" <Loopers-Delight@loopers-delight.com> >> Sent: Monday, September 18, 2006 5:47 PM >> Subject: LXP-5/1 (was 1/2 rack stereo effect >> processor) >> >> >> > >Oh man...i love lexicons but why mono >> input??;-((( >> >>i am gonna cry! >> >>Luis >> > >> > Why do you say its mono input? I have the manual >> and it says nothing >> > about summing the input to mono. There are two >> inputs on the back >> > panel, either one will work as a mono input or use >> both for stereo. Or >> > did I miss something? >> > >> > Kevin >> > >> >> > --- Louis Rossi <tarbit@hotmail.com> wrote: >> >> > >> >> >> I'd find a used Lexicon LXP. The reverb on the >> >> LXP-1 >> >> >> is very nice. >> >> >> Cheers >> >> >> Lou >> >> >> > -- >> > Till now you seriously considered yourself to be >> the body and to have a >> > form. That is the primal ignorance which is the >> root cause of all trouble. >> > >> > - Ramana Maharshi (1879-1950) >> > >> > Sound and Vision: http://www.minds-eye.org >> > >> > >> >> >> > > > www.myspace.com/luisangulocom > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > >