Re: Stupid Question

["Travis Hartnett" <travishartnett@gmail.com>]

On 3/8/07, rabbirabbifive <rabbirabbi5@yahoo.com> wrote:
>
>
> IIRC in loop 3 you can assign midi note equivalents for the front panel
> buttons.  1st button is midi note x (whatever you assign), next button
> over is note x+1 and so on.  Someone w/ a loop3 manual please chime in
> w/ specifics.
>

p.95 of the manual:

Default: 36 Source #
Parameter Row: MIDI
Determines the starting note number, or controller number, for
MIDI control of Echoplex operations.
Values: 0-99
When ControlSource is set to Notes,each press of an Echoplexbutton will
send a pair of Note On messages out the MIDIOut port; when
ControlSource is set to Controllers, a pair of Control Change messages will
be sent instead. This parameter determines the note or controller
number associated with the Parameter button. Other buttons are
assigned to notes or controllers based on the table below. In the table,
"n" is assumed to represent the Parameter button (n other words,
Source #). The numbers in parentheses are based on the default value of
36 for Source #.
Parameters n      (36)
Record n+2 (38)
Overdub n+3 (39)
Multiply n+4 (40)
Insert n+5 (41)
Mute n+6 (42)
Undo n+7 (43)
NextLoop n+8 (44)