[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: eh 2880 midi capabilities...!!!
Title: Re: eh 2880 midi
capabilities...!!!
Raul,
Kelly has it wrong, happy to say!!!
The 2880 (rev 1.5) has great MIDI implementation. Here is
the list:
CC# DV
2880 Parameter
9 0 to 127 Clix level
20 0 to 127 Live
signals monitor level
21 0 to 127 Track 1
play/feedback level
22 0 to 127 Track 2
play/feedback level
23 0 to 127 Track 3
play/feedback level
24 0 to 127 Track 4
play/feedback level
25 0 to 127 Mix track
play/feedback level
26 0 to 127 Tempo
slider
27 0 to 127 Live
signals pan
28 0 to 127 Track 1
pan
29 0 to 127 Track 2
pan
30 0 to 127 Track 3
pan
31 0 to 127 Track 4
pan
102
127 Push REC button
103
127 Push NEW button
104
127 Push PLAY button
105
127 Push TRACK SELECT
button
106
127 Push EXT SYNC button
107
127 Push MIXDOWN button
108
127 Push STEREO button
109
127 Push REVERSE button
110
127 Push OCTAVE button
111
127 Push PUNCH-IN button
112
127 Push QUANTIZE button
124
0 Change to
OMNI=OFF
125
0 Change to
OMNI=ON
There
must be at least 300mS between each button push message.
MIDI PROGRAM
CHANGE MESSAGES
The 2880
also interprets certain Program change messages as button pushes
and mute/unmute commands. A program
change message has one information
byte, P0 (0 to 127), but this is
usually presented to the user as being
1 to 128, shown below as P1.
P0 P1
2880 Parameter
80 81
Push PLAY button
81 82 Mute/unmute track 1's
play **
82 83 Mute/unmute track 2's
play **
83 84 Mute/unmute track 3's
play **
84 85 Mute/unmute track 4's
play **
85 86 Push REC button
86 87 Select track 1 for record (or 1 and 2 if
stereo)
87 88 Select track 2 for record (or 1 and 2 if
stereo)
88 89 Select track 3 for record (or 3 and 4 if
stereo)
89 90
Select track 4 for record (or 3 and 4 if stereo)
90 91 Push NEW button
91 92 Push QUANTIZE button
92 93 Push REC button
93 94 Push PLAY button
94 95 Push REVERSE button
95 96 Push TRACK SELECT button
96 97 Push STEREO button
97 98 Push PUNCH-IN button
98 99 Push EXT SYNC button
99 100 Push OCTAVE button
100 101 Push PLAY button
101 102 Mute/unmute track 1's play
**
102 103 Mute/unmute track 2's play
**
103 104 Mute/unmute track 3's play
**
104 105 Mute/unmute track 4's play
**
105 106 Push REC button
106 107 Push MIXDOWN button
107 108 Mute/unmute mix track's play **
108 109 Mute/unmute Dry
Out
**
109 110 Mute/unmute clix
level **
110 111 Mute/unmute all play tracks
***
** The
single channel mute/unmute action works as follows:
If the channel's level is greater than zero when
the command is
received then the channel will be muted. If the
channel's level
is zero when the command is received then the level will be
set
either to that of 2880's panel fader or to that of the last
CC
message (20..24), depending on which was most recently
effective.
*** When a mute/unmute all-play-tracks command is received all
play
tracks will be muted if ANY of them is greater than zero.
If
ALL of them are zero then each will be set to fader or CC
level.
MIDI OUT
(MIDI THRU)
2880
generally relays all received MIDI messages at its MIDI out
connector. But in Internal sync
mode it does not relay the
sequencer commands: STOP START CONT
CLOCK.
hi friends,
just wanting to know from some owner out there if it's
possible to control features such as pan, pitch shift, reverse,
etc
on the EH 2880 from a MIDI controller, since it seems to have
MIDI I/O.
thanks in advance,
raul.
--
The Playing Orchestra: http://www.telefonica.net/web2/tpo
Chain Tape Collective:
http://www.ct-collective.com
TPO at myspace: http://www.myspace.com/theplayingorchestra
--
...
http://www.zmix.net
