Re: keeley electronics DL4 Mod- noisy!

[Randolf Arriola <randolf@embryosongs.com>]

It does seem to me that you could be experiencing a bad patch cable. If 
it's 
the input/output connectors that should be quite easily resolved with a 
quick dose of contact cleaner.

The DL4 is a really nice and would be much nicer if the looping time was 
expanded with digital time readouts. One other thing  though the 
footswitches are espicially prone to failure. Mine needed replacing just 
after 3 weeks...bought new.

Another thing to note if you do use the polarity reverse adaptor jack for 
use with a One Spot Power adaptor to plug into the DL4's power jack. These 
adaptor jacks are prone to failure if bent too much too often.

I've also modded my own DL4 to resolve the slight volume drop and 
darkening 
effects of the bypassed tone.

Good Luck.

Randolf Arriola (aka the embryo)
http://www.soundclick.com/bands/5/theembryo.htm
http://www.myspace.com/the_embryo
----- Original Message ----- 
From: "Doug Wellington" <dougwellington@gmail.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Monday, September 03, 2007 4:43 AM
Subject: Re: keeley electronics DL4 Mod- noisy!


>> i just had my DL4 modded by keely electronics and had
>> a chance to try it today,unfortunately there is
>> soemthing wrong with it its very noisy but when i
>> wiggle and rock the cable from the output jacks it
>> goes away anybody know what that might be or how i can
>> try to fix it myself?
>
> OK, silly question maybe, but did you try a different cable?
>
> Doug
>
>