Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: DD20 tap tempo input



This thread prompted me to try to sync my DD20 to an EDP via the BeatSync jack last night, but it didn't seem to work reliably (sometimes the DD20 picked it up, sometimes not, sometimes yes but it came up with some random-seeming large number). Has anyone else tried this or had it happen? I'm midi-free and hoping I didn't just screw up my DD20 tap tempo input. Since I got both of these units (and many others) used on Ebay, I also never know whether something is functioning "normally" or not.

Eben

On Mon, Mar 17, 2008 at 2:42 PM, Goddard, Duncan <goddard.duncan@mtvne.com> wrote:
 
but I have talked many times in the past about a simple hardware midi-clock>trigger (or closure) device, such as ebay was once awash with, & interfacing this with a DL4 to allow a midi clock to tap-tempo the little green bugger.
no computers. :-)
 
I haven't got around to it, although I have a midi-clock>trigger converter inside of a yamaha cs30, doing something conceptually similar & with great success to the little analogue sequencer therein. I also have a similar midi-clock>trigger box that I got off of ebay ages ago, & which I need to check is functional.
 
they are advertised as midi clock converters, sync converters & so on, & are described in the context of triggering arpeggiators &c in pre-midi synths. the output, therefore, is usually a brief burst of 5v. this could easily be turned into a closure with a relay or solid-state switch, though I'd suggest that an opto-isolator might be a good idea in there somewhere. this approach may even let one interface directly with the electronics behind the tap-tempo switch.
 
devices that require notes or program changes to drive them will "occupy" a channel of the sequencer, which might be a nuisance, but on the other hand, it may actually be a more flexible arrangement, since you can set up the sequencer to "begin" or "cease" telling the delay pedal what to do by simply adding or omitting the notes that do the triggering.
a simple midi>cv/gate converter will then provide y'r tap tempo pulses.
 
the devices I have described above, & in the past, work purely off of midi clock & have selectable divide ratios.
you could, even, take a feed of pulses off the "step one" button/indicator of a drum machine, & adapt that to drive a closure....
 
I will get around to taking this further one day, I promise! my guitarist is always nagging me for this fix, even though I sold him an echo-pro.... (which he hates).
 
duncan.
CONFIDENTIALITY NOTICE

This e-mail (and any attached files) is confidential and protected by 
copyright (and other intellectual property rights). If you are not the 
intended recipient please e-mail the sender and then delete the email and 
any attached files immediately. Any further use or dissemination is 
prohibited.

While MTV Networks Europe has taken steps to ensure that this email and 
any attachments are virus free, it is your responsibility to ensure that 
this message and any attachments are virus free and do not affect your 
systems / data.

Communicating by email is not 100% secure and carries risks such as delay, 
data corruption, non-delivery, wrongful interception and unauthorised 
amendment. If you communicate with us by e-mail, you acknowledge and 
assume these risks, and you agree to take appropriate measures to minimise 
these risks when e-mailing us. 

MTV Networks International, MTV Networks UK & Ireland, Greenhouse, 
Nickelodeon Viacom Consumer Products, VBSi, Viacom Brand Solutions 
International and Comedy Central are all trading names of MTV Networks 
Europe.  MTV Networks Europe is a partnership between MTV Networks Europe 
Inc. and Viacom Networks Europe Inc.  Address for service in Great Britain 
is UK House, 180 Oxford Street, London W1D 1DS, UK.