RE: EDP reprograms itself tonight

["Dave Gallaher" <micdave@hiwaay.net>]

Travis--Yes, I've used an EFC-7 since buying the unit.

Andy--Thanks for pointing that out.  I'm going to start from scratch and
reprogram all my settings, hoping that the Undo feature will restore itself
to its excellent old ways.

Yes--it somehow reprogrammed itself.  I followed my normal protocol--push
all EFC-7 buttons a number of times to get them ready; power up; go.  This
time, it was all different.

Thanks for replies...

dave 
 

somehow you managed to change to Delay Mode

the parameter is called LoopDelay=DEL on older machines

don't know if that name got changed for later models,
but it's the parameter at the bottom left on the grid

(or did the EDP manage that on it's own?
it's hard to tell sometimes)

andy butler




  

Dave Gallaher wrote:
> I mentioned a few weeks back that my EDP had acted with a 'mind of its 
> own'-tonight, it outdid itself in a massive reprogramming that had me 
> scrambling for any commands that would work during my first 15 minutes 
> onstage. 
> 
>  
> 
> Basically, Record worked; then End Record would automatically activate 
> Overdub with the red light NOT coming on.  To stop Overdub, I tapped the 
> pedal and the light turned on, but overdubbing stopped.  I assume this 
> is a mode in the manual.  I've always used a manual Overdub, not 
> automatic.  I didn't know it was possible to overdub with the red light
off.
> 
>  
> 
> However, feedback was not controllable via the expression pedal, which 
> had no effect whatsoever.  And since my feedback knob (which hasn't been 
> touched in years) was somewhere less than 100%, my basic loops faded out 
> right away while uncommanded overdubs ruled the song.  I managed to get 
> the feedback knob back up, ending the degradation of loops, and once I 
> figured out the overdub red-light strategy, all seemed doable, at least.
> 
>  
> 
> Until I tried to multiply.  It showed the light, ran two or three 
> multiples, then played back only the first loop with nothing overdubbed 
> and no multiples.  So-no three-segment arrangements tonight.
> 
>  
> 
> However, and frustratingly, the undo button (which has been my main 
> problem lately) worked like it was brand new.
> 
>  
> 
> Needless to say, the unit and instructions manual are spread out in my 
> living room, ready for an all-night brainwashing session.  OPERATOR = 
> CONFUSION.
> 
>  
> 
> dave
> 
>  
> 
>  
>