Re: Echoplex Problem

[Matthias Grob <matilists@gmail.com>]

very strange in deed!
hardly a hardware problem
i guess you disconnected everything, especially the MIDI in to make sure 
that the problem is inside the EDP, right?
after it goes silent, does the loop level LED indicate that the sound is 
still in the memory or really gone?
if you then go to Mute and play it like a sample with Multiply or Insert, 
does it come back?
if you do not program your settings or only certain parameters and then 
reboot, the same happens?
"after the second of record" means after second press or after the second 
recording (or a second of recording :-) ?
do you use the Loop/Delay or InterfaceMode parameter?


On 29 Apr 2012, at 6:57 PM, Carsten Wegener wrote:

> 
> It happens like that.
> I do a reset. Record works properly (after second it just loops on and 
> on)
> I do all my settings, after each new setting still the same,
> 
> but if I shut down the Echoplex, all my settings are saved, the only 
> thing that changes, is that after the second of record
> the recorded loop plays once and disappears. The length is still on the 
> display, but no sound anymore.
> All the lights are green. If I try to reach the Loop via the next 
> loop-button - just the same....
> 
> Very strange.
> 
> Am 29.04.2012 um 13:53 schrieb Matthias Grob:
> 
>> no, we record the presets to a EEPROM
>> and after powering up with Param pressed, that should be erased
>> so can you save any presets so they come up again after power down?
>> 
>> On 27 Apr 2012, at 4:12 PM, Carsten Wegener wrote:
>> 
>>> It´s a normal Echoplex Looper with Loop IV, I think there shouldnt be 
>>> a battery inside.
>>> 
>>> Am 27.04.2012 um 20:16 schrieb andy butler:
>>> 
>>>> Carsten Wegener wrote:
>>>>> I did a reset, then it works. But I have make all my settings again. 
>>>>> After shutting down the EDP it´s the same again with the problem....
>>>> 
>>>> is there a battery in there somewhere?
>>> 
>