Re: EFC-7 issues

[andy butler <akbutler@tiscali.co.uk>]

OK, if we rule out the switch.

You can look at this:-

http://www.loopers-delight.com/tools/echoplex/FAQ6.html#static


but there are other things you could check first.

If you have a meter for resistance..
plug lead into EFC-7
hold down Rec
Check resistance across jack terminals, should be 0 ohms.


Also:

Plug lead into EDP Footswitch jack.
Then see if you can trigger Rec by shorting the jack terminals.


Having done that we can tell if the EDP is faulty.

If it is, then probably you'll need the assistance of a technician.



George Turcotte wrote:
> Right - I only wish it was that simple... 

the problem with the switches is really common.

It's still possible this is a switch issue from what you have said.



andy