Thanks for the info Ted, I'll give the Mouser people a go. If they can send the switches by US mail it shouldn't be too expensive Thanks, ----- Original Message ----- From: <ArsOcarina@aol.com> To: <Loopers-Delight@loopers-delight.com> Sent: Saturday, April 03, 2004 8:18 PM Subject: Re: EDP record foot switch acting up > Hi there, > > It sounds all too familiarly like a problem with the switch itself. "Record" > is the one that gets the most use/abuse so it's not too surprising that >it > goes first. I've replaced a few over the years. > > Try Mouser Electronics Part# 10PA005 > > View it on their website at: > http://www.mouser.com/index.cfm?&handler=data.listcategory&Ntt=*10pA005*&terms=10pA005&Dk=1&D=*10pA005*&N=0&crc=true > > They're a little more than $1 US from Mouser. I bought a bag of 20 from them > for around $17 a few years back -- which I figure will be a lifetime supply. I > have no idea what the exchange rate will be for you (or if there are > import/customs duties to figure in). But they're not too hard to replace if you are > the least bit handy with a soldering iron. Buy a few extras and keep 'em tucked > away for future emergencies. > > Good luck. > > tEd ® kiLLiAn > > http://www.pfmentum.com/flux.html > http://www.CDbaby.com/cd/tedkillian > http://www.guitar9.com/fluxaeterna.html > http://www.indiejazz.com/ProductDetailsView.aspx?ProductID=193 >