Re:Interactive-Graphical Tour of a Guitar System

["L. Angulo" <labalou2000@yahoo.com>]

Hi Andy,
good tips, maybe you can guide me as well.
I have an EDP in Aux1 and repeater in aux2,and the alt
3/4 outs are also being used with a MO-FX, EQ killer
and filter queen to process the loops.What i basically
want now is to send this effects also to the
individual tracks of the repeater,which has EFX
inserts and returns.The other thing is adding a bit of
reverb after the loopers to have it sound more natural
like you say.but ive run out of aux!would this be
possible? is too bad the mo-fx doesnt have reverb!
cheers
Luis



--- a k butler <akbutler@tiscali.co.uk> wrote:


---------------------------------
At 04:38 24/01/05, you wrote:
I'malso open to any suggestions for improvement too…
hi Krispen,
It seems your signal passes through an awful lot of
devices.
Might be worth checking the quality of the bypass on
thoseunits.

...and as you've got a mixer in your setup, no need to
stick to an 'allin series' configuration.

For instance, you could run the EDPs on the Alt3-4
outputs of your 1202mixer, and bring them 
back on a stereo channel.
The EDP mix controls are then both put to max and
forgotten.  
...and it's then dead easy to run a mic into the EDPs
if that becomesnecessary.

Also it's worthwhile putting a reverb on an aux send,
one advantage beingthat reverb
will sound more natural after the EDPs. ( because of
loop boundaries, andreverse).

Or put a chain of FX on each aux send, bringing them
back on a stereochannel.

I really liked the sound demos you did,
great stuff.

andy butler  


=====
www.luis-angulo.com


                
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - 250MB free storage. Do more. Manage less. 
http://info.mail.yahoo.com/mail_250