Re: Re EDP loosing MIDI Clock sync - Quest

["Claude Voit" <c.voit@vtx.ch>]

Luis

are you really sure of the quality off the soft thru off the behringer 
footped ?? before going after the edp again ...
 it took me 20 sec to make a search on the fcb yahoo group (soft thru) to 
find some post complaining  about the merge function

and you go with midi clock thru the fcb while banging whatever edp 
functions 
and complaining the edp looses sync "sometimes" after a while.
quote
I was doing a lot of multiplying,inserting,replacing and
re-recording and it would stay synced for the most
part but after a while it would start drifting
unquote

please get a "real" merge box then describe exactly what you pressed then 
we 
can perhaps understand what happened

Claude






----- Original Message ----- 
From: "Luis Angulo" <labalou2000@yahoo.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Sunday, December 04, 2005 1:05 PM
Subject: Re: Re EDP loosing MIDI Clock sync - Quest


Hi Kim,
Here is how i have the devices hooked up:
(this might not relate to auto record)
MPC1000 sampler midi out into FCB1010 midi in then its
midi out into EDP midi in.The FCB1010 controller shows
a blinking dot when receiving midi clock from the
MPC1000 i assume and the EDP was responding as well.I
was doing a lot of multiplying,inserting,replacing and
re-recording and it would stay synced for the most
part but after a while it would start drifting.I am
still wondering about this because i tried this at
home again and let a loop run for a long time and
didnīt notice any problems...
cheers
Luis



--- Kim Flint <kflint@loopers-delight.com> wrote:

> At 01:48 AM 12/2/2005, Luis Angulo wrote:
> >Yes,there is indeed a problem with it, i did a show
> on
> >Saturday where we improvised spontaneously music to
> >pictures and paintings which were being manipulated
> >with software.This is the first time i slave the
> EDP
> >to my MPC1000 and i had to constantly trigger the
> >reAlign function to keep the loops synced,i didnīt
> do
> >any loop copy or auto record,just simply recorded
> to
> >the running grooves of the MPC and it still
> >happened.As a master the EDP works flawlesly
> though.
>
> Luis,
>
> The problem we are talking about here only relates
> to using AutoRecord with
> sync=in, and has the easy fix of using LoopCopy=time
> instead of AutoRecord.
> If you were not using AutoRecord, then I don't think
> you were having the
> same issue Per is talking about. There isn't any
> known issue with normal
> use of sync in from midi clock - that should work
> fine. You would have to
> give a better explanation of your problem/setup for
> us to help you.
>
> kim
>
>
>
______________________________________________________________________
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    |
> http://www.loopers-delight.com
>
>


www.luis-angulo.com



__________________________________________
Yahoo! DSL - Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com