Support
Looper's Delight
|
Support |
|
|
At 12:15 PM -0700 5/29/99, Mike McGary wrote: >> Does anybody have a foot pedal that they'd like to part with? > >Following directions on Kim's website, I just built a pedal >for a friend who has one backordered. I'll put an image up >when I get a chance. > >Cost: ~$10 in the finished pedal. I bought extra resisters so I spent > more. > >I made the body out of a 2" heavy gauge PVC pipe that I split down >the middle. It takes up much less room that the stock EDP pedal. that's a clever way to do it, and cheap! >Note: I tried to add the 'parameter' button (with a on/off switch on >the back so it could be disabled for live performances)...but was not >successful. The web site say 28.0K Ohm is the right value, but the >original spec called for 33.2K Ohm. The 28.0K resister triggered the >MULTIPLY function (huh?), and the 33.2K triggers the parameter...but >only every once in a while. Not repeatable...and not usable (you can't >seem to 'untrigger' it). It could be a problem with my construction, >but I tried several resisters...and tried it by hand (touching the >resister >to the cord directly). The rest of the pedal works like the stock one. I just tried this parameter thing and had the same trouble. I guess we'll look at it and see if the software can read it better for a future version. Its something we never really tested, since it wasn't part of the production switch. We just stuck it in the soft, thinking it might be useful for somebody, and let it go.... I'll ket you know what we figure out. kim ______________________________________________________________________ Kim Flint | Looper's Delight kflint@annihilist.com | http://www.annihilist.com/loop/loop.html http://www.annihilist.com/ | Loopers-Delight-request@annihilist.com