Support
Looper's Delight
|
Support |
|
|
Dennis: > That's basically the set-up I use when simulating Alan Lucier's "I Am > Sitting in a Room". I'd love to listen to that sometime. probably a stupid question, but do you know if it's ever been released on CD? > I put the EDP into delay mode and feed the output back to the > input (set the EDP feedback at zero). I do that with my JamMan, but without a digital feedback control it incolves a lot of fiddling with the input level knob! I've been thinking of fitting a "fine tune volume" control (probably on my feedback volume control). > I think the technique has ALOT of potential. Unfortunately, the > configuration is so different than what I typically use that it's > hard to fit it in with my normal performance stuff. One of these > days... I'm in the middle of a BIG rig update; out go the pedals, in come the big digital kit! I could go with a floormount system (ie a GT5 feeding my JM and feedback pedal) or a rackmount (in which case feedback volume would be controlled by a Lex MPX-100 via a MIDI pedal). The only problem with the rackmount is that my looper system requires an open-closed gate pedal (right now, a distortion pedal with the volume turned off); the only way I can think to replicate this is by feeding the looper from the "left" rack output, the amp from the "right" and see if the left O/P can be switched on/off by MIDI (a bit like a pan control, but not affecting the right side). With the rackmount, the MPX in the loop would be ripe for serious loop lunacy. Of the other hand, the GT5 is easier - and a LOT cheaper. Hmmmmm....... _____________________________________________________________ Mike Hughes, Ph.D. Tel: (+44) 1483 300800 x2344 Lecturer in Biomedical Engineering, Fax: (+44) 1483 306039 University of Surrey, EMail: m.hughes@surrey.ac.uk Guildford, Surrey, UK www.surrey.ac.uk/MME/Research/BioMed