Support
Looper's Delight
|
Support |
|
|
I am working with an Allen & Heat Gl2 ( i think the update model has another name). It has 12 channels and 6 auxes, all configurable pre-post. I enter with my clean preamplified signal that goes in channel 1. The 6 auxes are divided in 3 stereo pairs, so i can drive 3 stereo fx. Their outputs come in from the channel strips, so they can be processed going back in any aux send again. There are also the four mono groups sends that I have been using to feed the loopers, whose outputs once again come in through the channel strips. It is an easy-to-see and control configuraton. I am waiting for the release of the Event EZ1, a digital mixer that (on paper) should allow any configuration using its several ins/outs. It also switch itself into a midi controller: in less words this machine should do what a Switchblade and a Peavey 1600x can do together. (I still have to touch and check one, so these thoughts could be easily found uncorrect). I also have a Rocktron Rack Interface that I use no more, should it interest anyone, mail me. all my best luca ----- Original Message ----- From: John Tidwell <wedgehed@yahoo.com> To: <Loopers-Delight@loopers-delight.com> Sent: Sunday, July 22, 2001 6:38 AM Subject: Re: Too many loopers, not enough auxes... > David Coffin submitted a post awhile back that gave > his solution using a Mackie. What it came down to was > using buss assignments & spare mixer outputs as fx > sends. I cheated an extra fx send out of the mixer on > my Tascam 488 by using its monitor outputs. > > I was recently going thru a box of old hi-fi system > junk & came across a little box called a Tape Control > Center, made by Realistic. It allowed you to hook up > to 3 tape decks to the tape monitor connection on a > home stereo receiver. It has switches that allows for > a rec/play/dub matrix. I now have it hooked to 2 aux > sends from a Rocktron G612 rack mixer to provide 3 > stereo fx sends. I currently have my Vortex, DL-4, & > Digitech 2101 connected to this. The other 2 sends on > the G612 go to my EDP & Digitech 2120. I'm still > tinkering with the setup & wondering how I'll work > the repeater into all of this. > > I wish Line 6 would come out with a "mixer modeler". > That way I could turn a knob & have 8 aux sends & 24 > channels. ;-) > > John > > > --- Tim Nelson <tcn62@ici.net> wrote: > > > > I'm still far from sure that it's the best way to > > connect it all, though. > > How have you guys approached using a massed pile of > > several simple loopers > > in combination (as opposed to a more > > multi-functioned device like the EDP)? > > > > -t > > > > > ===== > John Tidwell > > > > > __________________________________________________ > Do You Yahoo!? > Make international calls for as low as $.04/minute with Yahoo! Messenger > http://phonecard.yahoo.com/ > >